IEC-60529 standard rain test chamber
This product uses the scientific design makes the device capable of
realistic simulation drip, water spray, splashing water,
environmental, water and so on. Into the overall control system and
the use of inverter technology, making the rotation angle of
rainfall in the test frame, spray angle and swing the pendulum
swinging spray volume can automatically adjust the frequency
1. Meet the requirement of IEC60529 standard IPX3 water pouring
test and IPX4 water splash test.
2. The test sample will be put or installed on the center of the
half-round sinuous pipe and make the bottom of the test samples and
the oscillating axis in a horizontal position. During test, the
sample would spin around the center line.
3. Can manual default the test parameters, complete testing
automatically shut off the water supply and pendulum pipe angle
automatic zeroing and automatic eliminate seeper, avoid scale
blockage needle tip.
4. PLC, LCD panel test procedure control box, stainless steel
curved pipe, alloy aluminum frame, stainless steel shell.
5. Servo drive mechanism, guarantee the pendulum pipe angle of
precision, the overall pendulum tube structure for hang a wall.
6 Best after sales service: One year free parts maintenance.
7 Customization is available & welcomed..
|Testing room size||1000(W)*1000(H)*1000(D)||1400(W)*1100(H)*1000(D)|
|Performance index||Radius of Water spraying ring||400mm||600mm|
|Water pipe diameter||φ18mm|
|Nozzle hole diameter||φ0.4mm|
|Swing amplitude||±45°,±60°,±90°,±180°(theoretical value)|
|Rotating speed||1r/min can also be used for speed regulation without joints|
|Operation Control System||Controller||SANWOOD SH-5500 controller|
|Time controller||Imported programmable time computer integrated controller|
|Water pressure control||Electromagnetic flowmeter|
|Observation||Large area visualization toughened glass door|
|Water supply system||Water tank, booster pump|
|Power supply||AC380V TN-S|
|Safety protection||Leakage, short circuit, motor overheating|