ASTM B117 Salt Spray Test Chamber
Salt Spray Environmental Cyclic Corrosion Test Machine are designed to be flexible enough to comply with as many different CCT specifications as possible.
As standard they come with the ability to create 4 distinct
- Wetting mode;
- Salt Spray mode;
- Drying mode;
- Controlled humidity mode;
2. Technology Parameters
|Testing room volume(L)||108||270||480||800||1440|
|Brine tank capacity(L)||15||25||40|
|Max Consumption Power(KW)||1.5||2.5||3.5||5||7|
|Operating ambient temperature, humidity||<35℃,<85%RH|
|Testing room temperature||Brine test method(NSS ACSS)35℃±1℃/Erosion-resistant testing method
|Pressure Pot Temperature||Brine test method(NSS ACSS)47℃±1℃/Erosion-resistant testing
|Brine solubility||5% Sodium Chloride Solution or add 0.26 grams copper dichloride in
the 5% Sodium|
Chloride Solution per liter (CuCl2 2H2O)
|Compressed air pressure||1.00±0.01kgf/cm2|
|Spray quantity||1.0~2.0ml/80cm2/h (Collect 16 hours at least, take their average)|
|Inside and outside material||Imported corrosion resistant, anti-aging,|
high strength PVC board
|Heater||Corrosion resistance U type titanium tube|
|Temperature controller||LED digital display temperature controller, touch screen controller|
|Spraying mode||Continuous,intermittent spraying|
|Safety device||Over temperature protection switch, leakage protection, status
*Automatic / manual water system has automatically add the water
level of the water level is low, the test is not interrupted. Water
level is insufficient warning to ensure that the use of safety.
*Precision glass nozzle (PYREX) made of special glass, mist spread
evenly and naturally fall on the specimen, and 4000 hours of
continuous use, and to ensure that no crystalline salt obstruction.
*Attached double over-temperature protection, over-temperature
warning display, and cut off the heater power to ensure that the
use of safety.
*Inlet temperature controller using a digital display, PID control,
error of ± 0.1 ° C.
*Laboratory using direct steam heating, heating up fast, and even
reduce the standby time, heating tubes with high
corrosion-resistant titanium tubing.
*Spray tower attached to the conical dispersion, with oriented fog,
the function of regulating the amount of fog and uniform loading
amount of fog.
*The saturated air barrel using Henry's law, be heated
humidification, and provide the required humidity of the
laboratory. Its made of SUS # 304 stainless steel insulation
effect, with visual connectivity and drainage switch, in order to
visually saturated air the barrel water level and cleaning.
*With automatic defogging device that can clearly watch the
specimen in test chamber.
*Fog sealing sink, water seal to prevent fogging leakage.
*Laboratory sealing cover material for Taiwan imported PVC board,
pneumatic cylinder automatic lifting way, easy to operate safe and
*The import timer using digital display, accurate timekeeping, H.
M. seconds S can be segmented set any required test time, adjust
the time range from 0.01 seconds to 9999 hours. * Reagent
supplement bottles hidden attached water level viewing window, easy
to clean and should not be broken.
*Laboratory basket rack using plane indexing rack, can arbitrarily
adjust the angle, four off the fog, and the fog direction